Steel Leveling Feet

The steel leveling feet are designed for super heavy loads such as large presses and big storage racks. They address common issues like uneven floors and stress distribution during heavy equipment installation. The entire unit is forged from S45C carbon steel as a single piece and can support up to 1.18 tons of static load. Manufacturing tolerances are maintained between +2 and 0 mm, and after installation, the level deviation is kept within 0.1 degrees. These steel leveling feet are essential components for heavy equipment setup in the hardware industry, providing a solid foundation that won't let you down.

The base, cover, and screw of these leveling feet are all forged from S45C carbon steel. Surfaces are treated with both zinc and chrome plating and pass a 72-hour salt spray test, exceeding standard industry requirements. The rubber pad is a composite of S45C and rubber. With a Poisson's ratio close to 0.5, its volume changes by less than 2% under pressure. The pad is reinforced with thread and adhesive, cushioning shock loads from heavy machinery and preventing base bending or pad detachment. These feet perform reliably where standard feet would fail.

These steel leveling feet accommodate different load requirements. The steel component can be adjusted in 5 mm increments, and standard screw lengths can be customized in 25 mm increments. If a screw must be shortened, the cut end receives a rustproof passivation treatment to prevent corrosion. The feet attach quickly to a variety of heavy equipment bases, distributing support pressure evenly to protect floors and extend equipment life. For heavy industrial applications, they provide a dependable solution that keeps operations stable and safe.

Hot Tags: steel leveling feet, China steel leveling feet manufacturers, suppliers, factory, T Nut Leveling Feet, Heavy Duty Machine Feet, Weighing Leveling Feet, Lathe Leveling Feet, Appliance Leveling Legs, Industrial Machine Leveling Feet